+
  • 12.mp4
  • q12-4.jpg
  • hl5.jpg
  • q12-1.jpg
  • q12-2.jpg
  • q12-3.jpg
  • q12-5.jpg
  • q12-6.jpg
  • q12-7.jpg

Condenser coil



Category:

Condenser coil

  • Details
  • Model & Specs
  • Delivery Site
  • Packaging & Installation
    • Commodity name: Condenser coil

    Evaporating Condenser Coil

    The coil section rejects heat through the fresh air evaporating on the other side is through the sensible heat effect of pre-cooled circulating spray water. Reducing the coil's evaporative cooling effect is helpful to reduce the possibility of the coils surface scaling.

     

    Condenser Coil

    1.Oval tube 21.6*31.7mm

    2.The design pressure is 2.0Mpa and all the coils have been tested at least 3 times at 2.5Mpa to avoid leakage.

    3. Heat exchange coil material is Hot dip galvanized steel, Stainless steel 304, Stainless steel 316

     

    Features:

    1. The cross profile decreased then the velocity of medium in the tube comes faster.

    2. Decrease inner diameter of heat exchange tube with core compact tube arrangement can increase 65% of the heat exchange area in the same volume.

    3. Special oval tube ensure a better contacting of water on the outer surface of the tubes. Also can make the form tighter, less filling rate of liquid and less air flow resistance.

     

Previous

Next


Previous

None

Next

Recommended Products

/pro_detail/13.html

ECB evaporative condenser

/pro_detail/14.html

ECE evaporative condenser

/pro_detail/15.html

Condenser coil

/pro_detail/17.html

Air cooler/ Evaporator

Online message

Submit Message

Copyright ©2022  Yantai Oceanblue Refrigeration Engineering Co.,Ltd